2.2.2
DRAWINGS AND DIMENSIONS
The OSD2251EP is designed to be wall mounted onto a DIN-Rail (35mm top hat) fixture or by using 4
x M4 captivated screws (DIN Rail mount requires removal and flanges repositioned – see below). The
unit dimensions (excluding connectors, SFPs, etc) is shown in Figure 3 below.
DIN Mount
Unscrew x 4
Remove
DIN
PAGE 10
OPTICAL SYSTEMS DESIGN
Unscrew x 2
(Top & Bottom)
DIN to Wall Mount Conversion
FIGURE 3: MOUNTING DIMENSIONS
OSD2251EP OPERATOR MANUAL
Wall Mount
Rotate
DOC ID: 10119201
Screw x 2
(Top & Bottom)