Safety Precautions - Thermo Scientific Shake n Stack 6240 Operating And Maintenance Manual

Section 1
Introduction
Oven Temperature
Monitoring (cont'd)

Safety Precautions

1-2 Shake 'n Stack
The Shake 'n Stack is designed to be used with Thermo's hybridisation
bottle. These high quality leak-proof containers can be used at
temperatures up to 70°C (for catalogue numbers, see Section 8).
Bottles should not be used above 70°C without taking the precaution of
releasing the pressure formed by the release of gases from solutions as they
are warmed. Simply loosening, then retightening the bottle cap at
approximately 60°C should relieve the pressure.
Caution Dropping or over-tightening lids can cause cracking and failure.
Lids should be inspected prior to each use.
Caution Always wear gloves when handling the bottle and use the bottle
gripper provided (see Appendix II for full instructions on Bottle Care).
Finally, the Shake 'n Stack Oven is designed for reliability and ease of
maintenance. The rotisserie, shaking platform and drip tray can be easily
removed for cleaning.
Supply
Power rating: . . . . . . . . . . . . . . . . . . . . . . . . .250 W
Frequency: . . . . . . . . . . . . . . . . . . . . . . . . .50/60 Hz
Fuse rating: . . . . . . . . . . . . .110/120 V: 6.3A type T
. . . . . . . . . . . . . . . . . . .220/240 V: 1.6A type T
Ingress Protection Rating . . . . . . . . . . . . . . . . .IP22
Rotisserie speed control PCB fuse: . . . . . . . .500 mA
Note This item should not be serviced by the customer.
Working Environment: . . . . . . . . . . . .15°C to 25°C
Caution Care should be taken when lifting the Oven. It is advisable that
help is sought when removing an Oven from its packaging and when
stacking Ovens for use.
Caution During operation, caution should be taken with moving parts
that are accessible when the Oven door is open.
Thermo offers full service and technical support for all its products.
Alternatively, contact your local authorised distributor.
s
s
s
Thermo Scientific
s