Nustep TRANSITT Manual page 83

Pace Partner
2. Tap on the blue ball and slide to
NOTE: The pace target circle can be turned off by sliding the ball all the way to
the left.
PART 2. Set Extension Length Target
The Extension Length Target display provides visual feedback of step length. It
can be used to encourage full and equal step length of the right and left limbs and
discourage short, choppy stepping patterns.
Full extension beyond the zero-pedal position is approximately 4.4 inches. The
extension length can be adjusted to address the needs, goals or limitations of the
exerciser.
3. Tap on the green target bands and slide to adjust extension length.
Target band
left leg
PART 3. Set Initial Load Level
The Load field sets the resistance of the dynamic exercise. The load levels range from
1 to 15 in increments of 0.5.
4. Tap on the Load option on the Metric Bar.
desired target pace. Press Continue.
Target band
right leg
Load
83