Nustep T4 Foot Secure System Installation Manual

Installation of the Foot Secure System on a NuStep

Foot Secure System Kit Contents

50801
Foot Strap Sets
(Ratchet and Ladder)
Qty (4)

Required Tools

41582
Drill Template
(Included)

Instructions

1. Drill foot strap mounting holes
a. Position drill template on
pedal (shown) above the pedal link
boss.
b. Using the included drill bit Using the included drill bit and a
power drill, drill a hole on the inside
and outside walls of the pedal
the vacuum to collect all falling metal
debris. Prevent debris from falling
into the unit between the pedals! into the unit between the
c. Repeat for left side pedal
d. Remove aluminum shavings from Remove aluminum shavings from
the holes and clean up surrounding the holes and clean up surrounding
area.
NuStep, Inc. • 5111 Venture Drive, Ann Arbor MI 48108
the Foot Secure System on a NuStep the Foot Secure System on a NuStep
(Right foot pedal shown throughout instructions) (Right foot pedal shown throughout instructions)
41583 41583
Screw, 1/4 1/4-20 x 1.0
Qty (4) Qty (4)
Included Included
41584 41584
Drill Bit, 1/4" Drill Bit, 1/4"
(Included) (Included)
drill template on right foot
above the pedal link
hole on the inside
of the pedal. Use
falling metal
Prevent debris from falling
pedal
5111 Venture Drive, Ann Arbor MI 48108 USA • 800-322-4434
41580 Instruction 41580 Instruction - T4 Foot Secure System, Retrofit Kit Installation, Rev A
41166
Washer
Qty (2)
41585
5/32" Hex Wrench
(Included)
®
T4
41222
Nut, 1/4-20, Locking
Qty (4)
Not Included
7/16" Wrench
(or Adjustable)
Power Drill
Vacuum
4434
Page 1 of 3