Nustep TRANSITT Manual page 100

Weight Bearing Program
PART 2. Set Force Limits
The limit is
displayed in percentage of body weight (%BW).
2. Enter the limit. Tap Set Limit.
NOTE: Setting force limits for one leg will automatically set the same force limit
for the other. The limit notification for the other leg will not be active until the
toggle is switched to On.
Limit notification Off
Using the Program
1. Push isometrically or step dynamically while trying to keep the blue bar graph
below the red force limit line.
2. Note the notification that pops up when the exerciser exceeds the set weight
bearing limit.
100
Force limit line
Limit in %BW
Limit notification On