Nustep T6 Quick Start Manual

1
Attach power source
The T6 requires power to operate. Use AC
adapter provided with unit.
• Plug adapter into front or rear jack.
• Plug power cord into electrical outlet.
2
Operate 360˚ swivel seat
To support easy transfers on and off T6:
• Lift rear release lever to unlock.
• Rotate seat in either direction.
• Release lever to lock seat in place.
3
Unlock machine*
• Press down on StrideLock
• Handles and pedals move when unlocked.
* To lock: press and release device. It is UP when locked.
4
Adjust seat distance
• Lift front release lever to unlock.
• Slide seat forward or backward to adjust distance.
• Release lever to lock seat in position.
NOTE: Knee should have a slight bend when leg is extended forward.
5
Adjust seat recline
• Lift black lever on left side of seat.
• Push on seat back to recline.
• Release lever to lock seat in position.
6
Adjust handle length
• Pull lever up to unlock.
• Slide lever in or out to adjust length.
• Push lever down to lock handle in place.
NOTE: Elbow should have a slight bend when arm is extended forward.
For more details on adjusting the T6, please refer to the user manual.
© 2024 NuStep, LLC | 52587 Instruction - T6 Quick Start, Rev A
T6 Cross Trainer
QUICK START GUIDE
™ device. It is DOWN when unlocked.
front jack
For technical support, please contact:
support@nustep.com
800.322.4434 (US)
+1 734.769.3939 (International)
rear jack