Transportation And Storage; Return Procedure - Siemens SITRANS F Series Operating Instructions Manual

Service and maintenance

6.6 Return procedure

Additional Support
If you have additional questions about the device, please contact your local Siemens
representative and offices at:
Local contact person (http://www.automation.siemens.com/partner)
6.5

Transportation and storage

To guarantee sufficient protection during transport and storage, observe the following:
● Keep the original packaging for subsequent transportation.
● Devices/replacement parts should be returned in their original packaging.
● If the original packaging is no longer available, ensure that all shipments are properly
packaged to provide sufficient protection during transport. Siemens cannot assume liability
for any costs associated with transportation damages.
Special conditions for storage and transportation of the device are listed in Technical data
(Page 49).
Handling
Figure 6-2
6.6 Return procedure
Enclose the bill of lading, return document and decontamination certificate in a clear plastic
pouch and attach it firmly to the outside of the packaging.
44
NOTICE
Insufficient protection during storage
The packaging only provides limited protection against moisture and infiltration.
● Provide additional packaging as necessary.
Handling of sensor
SITRANS FM MAG 5100 W
Operating Instructions, 01/2020, A5E03063678-AC