Safety notes
2.6 Custody transfer
2.5
Improper device modifications
Improper device modifications
Risk to personnel, system and environment can result from modifications to the device,
particularly in hazardous areas.
● Only carry out modifications that are described in the instructions for the device. Failure to
2.6
Custody transfer
MAG 5100W (7ME652) is approved for custody transfer.
2.6.1
MI-001
The MAG 5100 W MI-001 verified and labeled products are a Class II approval according to
Directive 2014/32/EU of the European Parliament and Council of 26 February, 2014 on
measuring instruments, Annex VI Thermal Energy Meters (MI-004) in the sizes from DN 50 to
DN 1200 (Article No. 7ME6520). The MID certification is obtained as a modul B + D module
approval according to the above mentioned directive. Module B : Type approval according to
OIML R 49 Module D : Quality insurance approval of production.
±E%
Figure 2-1
MI-001 approval is valid for:
• DN 50 to 1200 mm (2" to 48")
• Horizontal and vertical installation
• Compact or remote with max. 500 m cable
• Power supply 115 to 230 V AC, 12 to 24 V AC/DC
Other restrictions may apply (see certificate).
Special label is required for MI-001 approved meters. An example of the product label is shown
below:
16
WARNING
observe this requirement cancels the manufacturer's warranty and the product approvals.
MI-001 verification tolerances
Cl. II = 5%
Q1
Q2
MI-001 verification tolerances
Cl. II = 2%
Q3
Q4
Operating Instructions, 01/2020, A5E03063678-AC
SITRANS FM MAG 5100 W