Improper Device Modifications; Requirements For Special Applications - Siemens SITRANS SCM IQ Operating Instructions Manual

Safety notes

3.2 Requirements for special applications

3.1.3

Improper device modifications

Improper device modifications
Risk to personnel, system and environment can result from modifications to the device.
• Do not carry out modifications to the device. Failure to observe this requirement cancels the
3.2 Requirements for special applications
Due to the large number of possible applications, each detail of the described device versions for
each possible scenario during commissioning, operation, maintenance or operation in systems
cannot be considered in the instructions. If you need additional information not covered by
these instructions, contact your local Siemens office or company representative.
Note
Operation under special ambient conditions
We highly recommend that you contact your Siemens representative or our application
department before you operate the device under special ambient conditions as can be
encountered in nuclear power plants or when the device is used for research and development
purposes.
Commissioning and operation with pending error
If an error message appears, correct operation in the process is no longer guaranteed.
• Check the gravity of the error.
• Correct the error.
• If the error still exists:
14
CAUTION
manufacturer's warranty and the product approvals.
WARNING
– Take the device out of operation.
– Prevent renewed commissioning.
Smart Condition Monitoring with IIoT Sensors
Operating Instructions, 08/2021, A5E50573389-AA