Mac allister MSTS1500-A Manual page 50

MSTS1500-A by MacAllister
EN
Repair
> This product does not contain any parts that can be repaired by the consumer.
Contact a qualified specialist to have it checked and repaired.
> If the power cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified person in order to avoid a safety hazard.
Transport
> Drop the saw blade to the lowest position.
> Remove the attached parts which protrude over the saw.
> Carry the produce with the help of another person.
> When shipping, use the original packaging if possible.
50
Connect
Blue to
N(Neutral)
Outer sleeve
firmly clamped
Warning: Never connect live or neutral wires to the earth terminal
of the plug, which is marked with E.
Only fit an approved 13 Amp BS 1363 or BS 1363/A plug and the
correctly rate fuse. If in doubt, consult a qualified electrician.
If a moulded plug is fitted and has to be removed take great care
in disposing of the plug and severed cable, it must be destroyed
to prevent engaging into a socket.
NOTE: When transporting the product use only transportation
devices and do never use guards for handling, lifting
or transportation.
Fig. 25
Care and maintenance
10 AMP fuse
approved to
BS 1362
Brown L(Live)
Cable grip