Bevel Cross Cutting - Mac allister MSTS1500-A Manual

MSTS1500-A by MacAllister
Warning: Risk of injury!
In order to avoid instability, always place the larger surface of the
work piece on the table when cross cutting and/or bevel cross
cutting.

Bevel cross cutting

Bevel cross cutting is the same as cross cutting, except that the saw blade bevel
angle is set to an angle other than 0°.
> Adjust the saw blade to the desired bevel angle. Make sure the bevel locking
handle is locked firmly.
> Follow the same instruction of "Cross cutting".
Fig. 16
Fig. 17
Product functions
EN
43