Mac allister MSTS1500-A Manual page 32

MSTS1500-A by MacAllister
EN
> Attach the dust extraction hose [15] to the dust ports [60] on the blade guard
and the hole B [61] of dust extraction adapter [1] as shown in the Fig. 9b.
> For the work piece passed successfully, to fix the dust extraction hose [15] in
the slot of the hose hold [18] before sawing. (Fig. 9c)
15
Fig. 9b
> To prevent sawdust buildup, for best result, attach a vacuum hose (not included)
to the hole C [62 ] of the dust extraction adapter [1] (See Fig. 9c). DO
NOT operate the saw with hose in place unless the vacuum is turned on.
32
Fig. 9a
60
61
1
Warning: Dust extraction adapter must be fitted and the table
saw must regularly check for dust build up and cleaned frequently,
otherwise there is a risk of heat built up and potential fire.
Before you start
59 58 1
15
18
62
Fig. 9c