MSTS1500-A by MacAllister
EN
Mitre cross cutting
Mitre cross cutting is the same as cross cutting, except that the mitre gauge is
locked at an angle other than 90°.
> Adjust the mitre gauge to the desired mitre angle. Make sure the mitre gauge
locking handle is locked firmly.
> Follow the same instruction of "Cross cutting".
Compound bevel mitre cross cutting
This sawing operation combines a mitre angle with a bevel angle.
> Adjust the saw blade to the desired bevel angle. Make sure the bevel locking
handle is locked firmly.
> Adjust the mitre gauge to the desired mitre angle. Make sure the mitre gauge
locking handle is locked firmly.
> Follow the same instruction of "Cross cutting".
44
Fig. 18
Fig. 19
Product functions