Mac allister MSTS1500-A Manual page 27

MSTS1500-A by MacAllister
> Carefully offer the rip fence [19] into the channel of the front rail [11] and push
the rip fence [19] completely to the saw blade [23] and hold firmly.
> Move the front rail [11] in such a way that the red line marking [50] on the
guide pointer [51] is in the zero position on the scale.
Fig. 4e
> Tighten all the hex nuts M6 [31] of the rails.
> Loosen the rip fence locking handle [22] by lift it up, place the rip fence on the
desired position of the working table, keep the rip fence is level on the working
table, then push down the rip fence locking handle [22] in order to lock the rip
fence in position.
11
19
51
22
Fig. 4f
Before you start
23
50
EN
27