Related Manuals for Mac allister MTSP800A
Summary of Contents for Mac allister MTSP800A
- Page 1 800W Table Saw MTSP800A Barcode: 5052931327522 WARNING! Read the instructions before using the product!
-
Page 2: Table Of Contents
MTSP800A by MAC ALLISTER Let’s get started These instructions are for your safety. Please read through them thoroughly before use and retain them for future reference. Getting started... Your product Technical and legal information Before you start more detail... Product functions... - Page 3 MTSP800A by MAC ALLISTER Let’s get started These instructions are for your safety. Please read through them thoroughly before use and retain them for future reference. Getting started... Your product Technical and legal information Before you start more detail... Product functions...
-
Page 4: Your Product
Your product MTSP800A by MAC ALLISTER Your product 1. Saw blade guard 10. Push stick 2. Riving knife 11. On/Off switch 3. Screw for saw blade guard 12. Star-grip screw for parallel stop 4. Table insert 13. Rip fence 5. Saw table 14. -
Page 5: Technical And Legal Information
Technical and legal MTSP800A by MAC ALLISTER information Technical data Voltage:230-240V~50Hz Rated input:800W, S2:10min Protection class: I Degree of protection: IP20 No load speed:2950min -1 Carbide saw blade:Ø200 x 30 x 2,4mm Thickness of riving knife:2,2mm Bevel angle range:0 -45º... - Page 6 Technical and legal MTSP800A by MAC ALLISTER information Symbols Warning! Denotes risk of personal injury, loss of life, or damage to the tool in case of non-observance Wear ear protection. Wear eye protection. Wear respiratory protection. The product complies with the applicable European directives...
- Page 7 Technical and legal MTSP800A by MAC ALLISTER information General safety WARNING: When using electric tools basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury including the following. Read all these instructions before attempting to operate this product and save these instructions.
- Page 8 Technical and legal MTSP800A by MAC ALLISTER information General safety 11 Do not abuse the cord > Never yank the cord to disconnect it from the socket. > Keep the cord away from heat, oil and sharp edges. 12 Secure work >...
- Page 9 Technical and legal MTSP800A by MAC ALLISTER information Additional safety > The bench-type circular saw is designed for the slitting and cross-cutting of all types of timber, commensurate with the machine’s size. The machine is not to be used for cutting any type of round wood.
- Page 10 MTSP800A by MAC ALLISTER Technical and legal information Additional safety > Do not use high speed steel (HS) blades. > The push-stick or push block should always be stored with the machine when not in use safe operation: • Use push-sticks or push blocks to feed the workpiece past the saw blade;...
-
Page 11: Before You Start
Before you start MTSP800A by MAC ALLISTER Unpack > Unpack all parts and lay them on a flat, stable surface. > Remove all packing materials and shipping devices if applicable. > Make sure the delivery contents are complete and free of any damage. - Page 12 Before you start MTSP800A by MAC ALLISTER Assembling the saw blade(Fig. 1-2) Caution! Pull out the power plug. > Turn the bevel locking screw (8) and set the saw blade to 0° and lock the bevel locking screw (8). > Unscrew the fixing screws (19) and remove bottom guard (6).
- Page 13 Before you start MTSP800A by MAC ALLISTER Assembling the riving knife(Fig. 3-5) > Take out the table insert (4) by removing the two cross-head screws (21). > Slacken the two screws (22), ensuring the plate under the table is not removed, then insert the riving knife slots under the screw heads.
- Page 14 Before you start MTSP800A by MAC ALLISTER Assembling the rip fence (Fig. 7-8) > This fence is used for all ripping operations. Never rip freehand without the fence in place and securely locked. > Adjust the rip fence (13) to the desired width from the blade using the scale rules on the table surface for reference.
- Page 15 Before you start MTSP800A by MAC ALLISTER Mounting the table saw (Fig. 10-11) The table saw must be properly secured to a sturdy workbench using the two mounting holes (9) on the saw base. > Place the table saw over the workbench table top and mark two locations on top of the workbench by setting the mounting holes at the saw base.
-
Page 16: In More Detail
MTSP800A by MAC ALLISTER more detail.. Product functions Operation Care and maintenance Trouble shooting Recycling and disposal Guarantee EC declaration of conformity... -
Page 17: Operation
Operation MTSP800A by MAC ALLISTER Intended use This table saw is designated with a rated input of 800 Watts. This product is intended for cutting wood and similar material e.g. MDF and chipboard. This product should not be used on other materials or those harmful to health. - Page 18 Operation MTSP800A by MAC ALLISTER Push stick > Push stick (10) is a device used for safely pushing a work piece through the blade instead of using your hands. They can be made from scrap wood in various sizes and shapes to be used in a specific project.
-
Page 19: Operation
Operation MTSP800A by MAC ALLISTER Bevel cross cutting (Fig. 15) > Bevel cross cutting is the same as cross cutting except that the wood is also cut at an angle other than at 90° with the flat side of the wood. Follow the same procedures as you would for cross cutting. - Page 20 Care and maintenance MTSP800A by MAC ALLISTER Bevel cutting > Bevel ripping is the same as ripping, except that the blade bevel angle is set to an angle other than “0”. > When bevel ripping material 150mm (6”) or narrower use the fence on the right side of the blade only.
-
Page 21: Care And Maintenance
Care and maintenance MTSP800A by MAC ALLISTER Saw blade replacement (Fig.18-19) If the saw blade is damaged or deformed, please replace the saw blade. Before replacing the saw blade, you must clean the flanges and use standard saw blade which conform to EN847-1. - Page 22 Care and maintenance MTSP800A by MAC ALLISTER Power cord If the power cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a safety hazard. UK plug If you need to replace the fitted plug then follow the instructions below.
-
Page 23: Trouble Shooting
Trouble shooting MTSP800A by MAC ALLISTER Trouble shooting Suspected malfunctions are often due to causes that the user can fix themselves. Therefore check the product using this section. In most cases the problem can be solved quickly. Problem Solution Possible cause 1. -
Page 24: Guarantee
Guarantee MTSP800A by MAC ALLISTER Guarantee 1.This product has been manufactured to a high quality standard. It is guaranteed against faulty materials and workman ship for 2 years from purchase, please retain your till receipt as proof of purchase. 2.If the product is found to be defective within the relevant time period,... -
Page 25: Ec Declaration Of Conformity
EC declaration of MTSP800A by MAC ALLISTER conformity Declaration of conformity We,B&Q plc Chandlers Ford, Hants, SO53 3LE, United Kingdom Declare that the product: Designation: 800w Table Saw Model: MTSP800A Complies with the following Directives 2004/108/EC Electromagnetic Compantibility Directive 2006/42/EC Machinery Directive... - Page 26 www.diy.com GB-IE B&Q plc Chandlers Ford, Hants, SO53 3LE, United Kingdom...