Technical Specifications - Mac allister MSTS1500-A Manual

MSTS1500-A by MacAllister

Technical specifications

General
> Input Voltage
> Power Input
> No Load Speed
> Degree of Protection
> Blade Size
> Main Table Size
> Extension Table Size (left/right)
> Extension Table Size (rear)
> Blade Tilting Range
> Max. Cutting Capacity
> Net Weight
NOISE
A weighted sound pressure L
A weighted sound pressure L
Uncertainty...................................................................................................3dB(A)
The sound intensity level for the operator may exceed 85dB(A) and sound
protection measures are necessary.
Through poor conditions of the electrical MAINS, shortly voltage drops can appear
when starting the EQUIPMENT. This can influence other equipment (e.g. blinking
of a lamp). The machine should only be connected to a supply having a system
impedance lower than 0.2496ohm, In case of need, you may contact your local
supply authority for further information.
Important note
Remove the mains plug from socket before carrying out any adjustment or
servicing.
Ensure your mains supply voltage is the same as your tool rating plate voltage.
The following information applies to professional users only but is good
practice for all users:
ADDITIONAL SAFETY WARNING FOR CONSTRUCTION DUST
The updated Control of Substances Hazardous to Health Regulations 1st October
2012 now also targets to reduce the risks associated with silica, wood and gypsum
dusts.
Construction workers are one of the at-risk groups within this because of the dust
that they breathe: silica dust is not just a nuisance; it is a real risk to your lungs!
Silica is a natural mineral present in large amounts in things like sand, sandstone
:
220-240V~50Hz
: S1 1500 W
: 4500min
: IP20
: ø254mm × ø30mm × 2.8mm, 40T
: 554 × 540mm
: 115 × 540mm
:
554 × 118mm
:
0°~45°
:
80mm (0°) / 55mm (45°)
:
26.7kg
.............................................................101.0dB(A)
pA
............................................................114.0dB(A)
WA
Technical and legal
information
-1
EN
05