Siemens SINUMERIK 840D sl Programming Manual page 345

Example 2: Turning
Program code
N.. ...
N10 TRANS X0 Z150
N15 L20
N20 TRANS X0 Z140 (or ATRANS Z-10)
N25 L20
N30 TRANS X0 Z130 (or ATRANS Z-10)
N35 L20
N.. ...
Further information
TRANS X... Y... Z...
Translation through the offset values programmed in the specified axis directions (path,
synchronized axes and positioning axes). The reference is provided by the last settable work
offset called (G54 to G57, G505 to G599).
NOTICE
The TRANS command resets all frame components of the previously activated programmable
frame.
Fundamentals
Programming Manual, 09/2011, 6FC5398-1BP40-2BA0
Coordinate transformations (frames)
12.3 Programmable zero offset
Comment
; Absolute offset
; Subroutine call
; Absolute offset
; Subroutine call
; Absolute offset
; Subroutine call
345