Siemens SINUMERIK 840D sl Programming Manual page 54

Creating an NC program
3.4 Program examples
Program code
N280 POSITION:
N290 HOLES2(0,0,25,0,45,6)
N300 ENDLABEL:
N310 MCALL
N320 G0 Z200 M5 M9
N330 T="SPB5"
N340 M6
N350 S2600 M3 M8
N360 G90 G60 G54 G17 X25 Y0
N370 MCALL CYCLE82(2,0,1,-13.5,,0)
N380 REPEAT POSITION
N390 MCALL
N400 G0 Z200 M5 M9
N410 M30
54
Comment
; Jump mark for repetition.
; Position pattern for
drilling.
; End identifier for
repetition.
; Resetting of the modal call.
; Call twist drill D 5 mm.
; Modal call of the drilling
cycle.
; Repetition of the position
description from centering.
; Resetting of the drilling
cycle
; End of program.
Programming Manual, 09/2011, 6FC5398-1BP40-2BA0
Fundamentals