Other information
15.1 Axes
Behavior of programmed axis types
Geometry, synchronized and positioning axes are programmed.
•
Path axes traverse with feedrate F in accordance with the programmed travel commands.
•
Synchronized axes traverse synchronously to path axes and take the same time to
traverse as all path axes.
•
Positioning axes traverse asynchronously to all other axes. These traversing movements
take place independently of path and synchronized movements.
•
Command axes traverse asynchronously to all other axes. These traversing movements
take place independently of path and synchronized movements.
•
PLC axes are controlled by the PLC and can traverse asynchronously to all other axes.
The traversing movements take place independently of path and synchronized
movements.
420
Programming Manual, 09/2011, 6FC5398-1BP40-2BA0
Fundamentals