Axis-Specific Diameter/Radius Programming (Diamona, Diam90A, Diamofa, Diacycofa, Diamchana, Diamchan, Dac, Dic, Rac, Ric) - Siemens SINUMERIK 840D sl Programming Manual

8.3.7 Axis-specific diameter/radius programming (DIAMONA, DIAM90A, DIAMOFA,
DIACYCOFA, DIAMCHANA, DIAMCHAN, DAC, DIC, RAC, RIC)
Function
In addition to channel-specific diameter programming, the axis-specific diameter
programming function enables the modal or non-modal dimensions and display in the
diameter for one or more axes.
Note
The axis-specific diameter programming is only possible for axes that are permitted as
further transverse axes for the axis-specific diameter programming via
MD30460 $MA_BASE_FUNCTION_MASK ( → see machine manufacturer's specifications).
Syntax
Modal axis-specific diameter programming for several transverse axes in the channel:
DIAMONA[<axis>]
DIAM90A[<axis>]
DIAMOFA[<axis>]
DIACYCOFA[<axis>]
Acceptance of the channel-specific diameter/radius programming:
DIAMCHANA[<axis>]
DIAMCHAN
Non-modal axis-specific diameter/radius programming:
<axis>=DAC(<value>)
<axis>=DIC(<value>)
<axis>=RAC(<value>)
<axis>=RIC(<value>)
Fundamentals
Programming Manual, 09/2011, 6FC5398-1BP40-2BA0
Geometry settings
8.3 Dimensions
183