Digigram AUDIOWAY BRIDGE B1 User Manual page 49

AUDIOWAY BRIDGE B1, B2, B3
 SRC status:
 Channel meter ( dBFS scale) Channel meter ( dBFS scale)
NOTE : If AES input clock is selected as clock master and SRC is selected on the same AES Input, in this If AES input clock is selected as clock master and SRC is selected on the same AES Input, in this If AES input clock is selected as clock master and SRC is selected on the same AES Input, in this
case, as system is synchronous to this input, SRC is not necessary and so, it is bypassed. ( but SRC case, as system is synchronous to this input, SRC is not necessary and so, it is bypassed. ( but SRC case, as system is synchronous to this input, SRC is not necessary and so, it is bypassed. ( but SRC
remains selected )
AES STEREO OUTPUT
Each block of 4 stereo output channels has its own feedback status: Each block of 4 stereo output channels has its own feedback status:
 Channel setup indicator
 Channel meter ( dBFS scale) Channel meter ( dBFS scale)
11.8.1.2 Device setup (SRC on/off)
Advanced parameters for AWc-AES1616
SRC Setup can be set ON (Checked) /OFF (Unchecked) for each stereo AES input. SRC Setup can be set ON (Checked) /OFF (Unchecked) for each stereo AES input. SRC Setup can be set ON (Checked) /OFF (Unchecked) for each stereo AES input.
In sample window above, only AES Input 11/12 and AES Input 13/14 has SRC set to ON. In sample window above, only AES Input 11/12 and AES Input 13/14 has SRC set to ON. In sample window above, only AES Input 11/12 and AES Input 13/14 has SRC set to ON.
SRC can also be enabled / disabled by clicking on the SRC status button SRC can also be enabled / disabled by clicking on the SRC status button
B3
Lock and synced Lock and synced
Lock and SRC active Lock and
ON
OFF


Channel setup
AES1616 device can be defined using dedicated setup slot window
AWc-AES1616 setup window
ng dedicated setup slot window :
User's Manual AUDIOWAY BRIDGE v1.0 User's Manual AUDIOWAY BRIDGE v
U ' 1.0
SER S MANUAL V
Page 48/55