AUDIOWAY BRIDGE B1, B2, B3
11.2 AUDIO ROUTING
11.2.1 Reducing maximum I/O number
AWc-DANTE card supports a maximum of 64 audio inputs + 64 audio outputs. The default I/O channel
numbers are set to 64 in and 64 out. However, you can reduce these numbers of inputs and outputs in order
to fit your needs.
This can be done as follows:
From the AVS-Monitor Software application, open the AWc-DANTE Setup page. Default I/O Setup
is set to 64 inputs and 64 outputs.
You can then change the maximum I/O numbers by using the two combo boxes.
Once done, click on the "Apply" button, and then "Save & Close".
The device must be restarted to take into account the changes.
(Figure provided for AUDIOWAY BRIDGE B1)
User's Manual AUDIOWAY BRIDGE v1.0
U
'
1.0
SER
S MANUAL V
Page 32/55