Front And Back Panels; Audioway Bridge Front Panel - Digigram AUDIOWAY BRIDGE B1 User Manual

AUDIOWAY BRIDGE B1, B2, B3

FRONT AND BACK PANELS

6
6.1

AUDIOWAY BRIDGE FRONT PANEL

Front control panel displays quick information on the device status without the need to launch any software.
LED activity meaning:

Event: reflects Core or slot event.

Activity: reflects core activity, network activity or audio signal presence

Fault: Default found on AUDIOWAY BRIDGE

Error: Malfunction detected

Ready: AUDIOWAY BRIDGE is ready to be used

Power: Power supply is OK

Main: Main power supply present

Aux: Auxiliary power supply present
A Reset button (1) is also available to be used with a paper clip. Two functions can be obtained through
pressing this button:

Reset AUDIOWAY BRIDGE: press button for two seconds. Device will restart as if powered on.

Revert to Factory default: while powered off, press button and power on the device. Continue
pressing button until all panel LED are lighted. Both AUDIOWAY BRIDGE and all slots will then
reverted to their factory default values.
Note: Use "Revert to Factory" function with care as it will reset all AUDIOWAY BRIDGE and slot parameters,
and might lead to strange behavior on the network used.
The front panel of AUDIOWAY BRIDGE B1,B2 and B3 are identical
Reset
User's Manual AUDIOWAY BRIDGE v1.0
U ' 1.0
SER S MANUAL V

Page 11/55