Awc-Dante Interface - Digigram AUDIOWAY BRIDGE B1 User Manual

AUDIOWAY BRIDGE B1, B2, B3

11.6 AWc-DANTE INTERFACE

11.6.1 Clock source
The clock source of the AWc-Dante interface can be selected from the Slot Setup menu. It can be:

the AW-CORE

the Dante network. Since the AWc the Dante network. Since the AWc-Dante can be elected as GrandMaster, its own internal clock
oscillator will both feed the Dante/AES67 network AND the AW
physical interfaces.
11.6.2 Switch / Redundant Mode
 When you power-up your card for the first time, it will start in switched mode. up your card for the first time, it will start in switched mode.
Changing switched/redundant mode will seriously affect your network architecture. A dead loop can Changing switched/redundant mode will seriously affect your network architecture. A dead loop can Changing switched/redundant mode will seriously affect your network architecture. A dead loop can
be created if mode is changed without taking care of how RJ45 cables are plugged. A good practice is be created if mode is changed without taking care of how RJ45 cables are plugged. A good practice is be created if mode is changed without taking care of how RJ45 cables are plugged. A good practice is
to always unplug all cables (except the one that gives you access to the card) before changing network to always unplug all cables (except the one
mode.
When you go on control page of your AUDIOWAY BRIDGE device, the AWc-DANTE When you go on control page of your AUDIOWAY BRIDGE device, the AWc
following information:
B3
Dante interface can be selected from the Slot Setup menu. It can be: Dante interface can be selected from the Slot Setup menu. It can be:
Dante can be elected as GrandMaster, its own internal clock
the Dante/AES67 network AND the AW-CORE + other MADI and AES/EBU CORE + other MADI and AES/EBU
u access to the card) before changing network
DANTE slot will display the
User's Manual AUDIOWAY BRIDGE v1.0 User's Manual AUDIOWAY BRIDGE v
U ' 1.0
SER S MANUAL V
Page 36/55