AUDIOWAY BRIDGE B1, B2, B3
U
'
1.0
SER
S MANUAL V
11.6.3 Static / Dynamic IP configuration
A Dante device needs to have an IP address to work properly. The IP addresses of the devices connected to
a Dante network must belong to the same sub-network. Exactly like on a computer, there are two ways to get
an IP address:
11.6.3.1 Dynamic IP
Dante device will automatically obtain an IP address from the network. To do so, a DHCP server MUST run
inside the network. This server will give IP addresses to all devices automatically.
If no DHCP server is running on your network, Dante devices will start with a default IP address (typically
"169.254.x.y", with netmask "255.255.0.0"). Please ensure that your computer network interface card is
properly configured to have access to this address range.
In the same configuration tab than before, please select "Obtain an IP Address Automatically (default).
User's Manual AUDIOWAY BRIDGE v1.0
Page 39/55