Rebooting Audioway Bridge - Digigram AUDIOWAY BRIDGE B1 User Manual

AUDIOWAY BRIDGE B1, B2, B3

11.3 REBOOTING AUDIOWAY BRIDGE

Several parameters configured through the Dante Controller software application require a reboot of
AUDIOWAY BRIDGE to become effective:

AES67 mode

Switch / redundant mode

DHCP / Manual IP addressing
Follow the following sequence to reboot AUDIOWAY BRIDGE:

Right-click on the Control Network / AW-CORE menu

Select "Device functions" then "Reset device"

Confirm by typing Ctrl+Shift so that the YES box becomes effective
When you return to Dante controller menus, the reboot will be taken into account and requested
modifications become effective.
User's Manual AUDIOWAY BRIDGE v1.0
U ' 1.0
SER S MANUAL V
Page 33/55