Digigram AUDIOWAY BRIDGE B1 User Manual page 38

AUDIOWAY BRIDGE B1, B2, B3 U ' 1.0
SER S MANUAL V
To open AWc-DANTE setup page, simply click on the front panel picture on the left. Setup page looks like
following:
The selection of switched or redundant mode is made through Dante controller. The current working mode is
displayed, and cannot be modified..
11.6.2.1 Mode selection switched / Redundant with using Dante Controller software
Network mode selection can also be down using Dante Controller. To do so, launch Dante Controller
Software and select Device view in the upper menu. Then select the properties of AUDIOWAY BRIDGE in
the Device view.
User's Manual AUDIOWAY BRIDGE v1.0 Page 37/55