Saving And Recalling The System Settings (System Memory); Saving The Current System Settings; Saving By The System Memory Buttons; Saving By The Gui Menu Operation - Yamaha RX-Z11 Owner's Manual

Saving and recalling the system settings (System Memory)

Use this feature to save and recall up to 10 of your favorite setting
for the main zone. You can also save up to four of your favorite
settings for Zone 2, Zone 3, or Zone 4.

Saving the current system settings

Before performing the following operations, set the operation mode
selector on the remote control to F AMP.
■ Saving by the 7 SYSTEM MEMORY buttons
You can save the current system settings stored in "Memory1" to
"Memory4" by pressing the corresponding 7SYSTEM MEMORY
buttons.
Press and hold one of the
buttons on the remote control for 4 seconds.
"MEMORY 1 SAVE" (example) appears in the front panel display,
and then this unit saves the current system setting to the
corresponding memory number.
SYSTEM MEMORY
1 2
Notes
• If system settings are already saved in the selected memory number, this
unit overwrites the old system settings.
• To save the system settings for Zone 2, Zone 3, or Zone 4, press HZONE
on the remote control repeatedly to select the operation zone setting of the
remote control and then press and hold the desired 7SYSTEM
MEMORY button for 4 seconds. You can save the system settings for the
selected Zone only when the zone is turned on.
• This unit saves the parameters in the groups you select by using the GUI
menu when you save the parameters by using the 7SYSTEM MEMORY
buttons.

■ Saving by the GUI menu operation

You can save the current system settings stored in "Memory1" to
"Memory10" by using the "System Memory" menu in the GUI
menu.
Press I MENU on the remote control.
1
The top menu appears in the video monitor.
Stereo/Surround
Input Select
Manual Setup
Auto Setup
System Memory
SYSTEM MEMORY
7
3 4
Volume
Sound
Video

Saving and recalling the system settings (System Memory)

2
Press 9k / n repeatedly to select "System Memory"
and then press 9h.
The "System Memory" menu appears in the video monitor.
Main
Zone2
Zone3
3
Press 9k / n repeatedly to select the desired zone
and then press 9h.
In the following example, you select "Main" (main zone). The
list of the memory number appears in the video monitor.
Main Load
Main Save
Main Rename
4
Press 9k / n repeatedly to select "Main Save" and
then press 9h.
The following menu appears in the video monitor.
Memory1
Memory2
Memory3
Group of the system parameters
5
Press 9k / n repeatedly to select the desired
memory number ("Memory1" to "Memory10" or
"Memory4") and then press 9h.
The list of the saved items appears in the video monitor.
Memory1
Memory2
Memory3
Main Load
Main Save
Main Rename
Memory1
Memory2
Memory3
Main Save
Input/HDMI Out
✓ Audio
Volume
✓ SP Config
✓
Video
✓
Option
Save
Main Save
Input/HDMI Out
✓
Audio
Volume
✓
SP Config
✓
Video
✓
Option
Save
Select: ENTER
115
En