Yamaha RX-Z11 Owner's Manual page 94

Graphical user interface (GUI) menu
Sound field parameter
Rev. Level
■ Stereo program parameter descriptions
Sound field parameter
Direct
("2ch Stereo" only)
Center Level
Surround L Level
Surround R Level
Sur.Back L Level
Sur.Back R Level
F.PRNS L Level
F.PRNS R Level
R.PRNS L Level
R.PRNS R Level
("11ch Stereo" only)
■ Compressed Music Enhancer mode parameter descriptions
The Compressed Music
Enhancer mode
Level
("Straight Enhancer" and
"11ch Enhancer" only)
94
En
Reverberation level. Adjusts the volume of the reverberation sound. The larger the value, the stronger the reverberation
becomes.
Control range: 0 to 100%
2-channel stereo direct. Bypasses the decoders and DSP processors of this unit for pure hi-fi stereo sound when playing 2-
channel analog sources.
Choices: Auto, Off
y
• Select "Auto" to bypass the decoders, DSP processors and the tone control circuitry only when "BASS" and "TREBLE"
are set to "BYPASS" (see page 65).
• Select "Off" not to bypass the decoders, DSP processors and the tone control circuitry when "BASS" and "TREBLE"
are set to "BYPASS".
• When multi-channel signals are input, they are downmixed to 2 channels and output from the front left and right
speakers.
• The low-frequency signals of the front left and right channels are redirected to the subwoofer in the following cases:
– "Bass Out" is set to "Front & SWFR" (see page 101).
– "Front" is set to "Small" (see page 99) and "Bass Out" is set to "SWFR" (see page 101).
11-channel stereo center, surround left, surround right, surround back, presence left and presence right levels. Adjusts the
volume level of each channel in the 11-channel stereo mode. The available parameters differ depending on the speaker
settings.
Control range: 0 to 100%
Straight enhancer or 11-channel enhancer effect level. Select "High" or "Low" to adjust the effect for the high-frequency.
Choices: High, Low
Features
Source sound
Rev. Level
Features
Features
Time