Advanced Setup; Using The Advanced Setup Menu - Yamaha RX-Z11 Owner's Manual

Advanced setup

This unit has additional menus that are displayed in the front panel display. The advanced setup menu offers additional operations to adjust
and customize the way this unit operates. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your
listening environment.
Notes
• The settings you make are reflected next time you press B MASTER ON/OFF inward to the ON position to turn on this unit (see page 43).
• Only B MASTER ON/OFF and M PROGRAM are effective while you are using the advanced setup menu.
• All the other operations cannot be made while you are using the advanced setup menu.
• The advanced setup menu is only available in the front panel display.

Using the advanced setup menu

Press B MASTER ON/OFF on the front panel to
1
release it outward to the OFF position to turn off this
unit.
Press and hold M PROGRAM and then press
2
B MASTER ON/OFF inward to the ON position to
turn on this unit.
Press and hold MPROGRAM until "ADVANCED SETUP"
appears in the front panel display.
A D V A N C E D S E T U P
Rotate the M PROGRAM to select the parameter you
3
want to adjust.
The name of the selected parameter appears in the front panel
display.
Push M PROGRAM repeatedly to change the
4
selected parameter setting.
Press B MASTER ON/OFF to release it outward to
5
the OFF position to save the new setting and turn off
this unit.
y
The settings you made are reflected next time you turn on this unit.
142
En

Advanced setup

■ Speaker impedance
Use this feature to set the speaker impedance of this unit so that it
matches that of your speakers.
Choice
8ΩMIN
6ΩMIN
■ Remote sensor
Use this feature to activate or deactivate the signal-receiving
capability of the remote control sensor on the front panel of this
unit.
Choice
ON
OFF
Note
We recommend setting the parameter to "ON" in most cases.
SPEAKER IMP.
Descriptions
Select this setting to set the speaker impedance to 8 Ω.
The impedance of each speaker must be 8 Ω or higher.
Select this setting to set the speaker impedance to 6 Ω.
The impedance of each speaker must be 6 Ω or higher.
REMOTE SENSOR
Descriptions
Select this setting if you want to activate the signal-
receiving capability of the remote control sensor.
Select this setting if you want to deactivate the signal-
receiving capability of the remote control sensor.