Yamaha RX-Z11 Owner's Manual page 110

Graphical user interface (GUI) menu
Zone2 Mono/Zone3 Mono/Zone4 Mono
(Zone 2/Zone 3/Zone 4 monaural mode)
Use this feature to select whether you play back sources monaurally
in the selected zone.
Choice
Off Turns off the monaural playback mode. This unit plays
back sources in stereo.
On Turns on the monaural playback mode. This unit mixes
down the left and right channel signals and plays the
sources monaurally.
Muting Type
(Zone 2/Zone 3/Zone 4 muting type)
Use this feature to adjust how much the mute function reduces the
output volume of the selected zone.
Choice
Full Mutes all the audio output.
–20dB Reduces the current volume by 20 dB.
–40dB Reduces the current volume by 40 dB.
Tuner Select
(Zone 2/Zone 3/Zone 4 tuner function select)
(U.S.A. model only)
Selects whether this unit receives HD Radio station signals in the
selected zone (see page 41).
Choice
TUNER Receives the conventional AM/FM radio signals from
the ANTENNA–2 terminals.
HD Radio Receives HD Radio station signals from the
ANTENNA–1 terminals.
110
En
Descriptions
Functions
Functions
■ Zone OSD (Zone on-screen display)
Use this feature to display the operational status of Zone 2, Zone 3,
and Zone 4 on the Zone 2 video monitor connected to the ZONE
VIDEO jacks on the rear panel of this unit. The Zone 2, Zone 3, and
Zone 4 information to be displayed is listed as follows:
• The input source
• The volume level
• The audio mute status
• The tonal quality status
• iPod or network/USB menu when "DOCK" or "NET/USB" is
selected as the input source of Zone 2, Zone 3, and/or Zone 4
• FM/AM tuning information when "TUNER" is selected as the
input source of Zone 2, Zone 3, and/or Zone 4
• HD Radio information when this unit is tuned into a HD Radio
station in Zone 2, Zone 3, or Zone 4
• The XM Satellite Radio information when "XM" is selected as
the input source of Zone 2, Zone 3, and/or Zone 4 (U.S.A. and
Canada models only)
Choice
Zone2 Displays the operational status of Zone 2 only.
Zone All Displays the operational status of Zone 2, Zone 3, and
Zone 4.
Notes
• You can connect up to two composite and one component video monitors
to the ZONE OUT VIDEO jacks and ZONE OUT COMPONENT VIDEO
jacks. If you connect multiple video monitors to the ZONE VIDEO and
ZONE OUT COMPONENT VIDEO jacks, these video monitors display
the same video images of the input source of Zone 2.
• When you set "Zone OSD" to "Zone All", the operational status of Zone 3
and Zone 4 appears on the Zone 2 video monitor(s) even if Zone 2 is
turned off.
Functions