Default Macro Functions; Programming Macro Operations (Macro) - Yamaha RX-Z11 Owner's Manual

■ Default macro functions

Pressing To automatically transmit these signals
macro
STANDBY
POWER
MULTI
V-AUX
PHONO
MD
TAPE
BD
HD DVD
DVD
CD
CD-R
CBL
SAT
DTV
DVR
VCR
TUNER
DOCK
NET
USB
XM
(U.S.A. and
Canada
models)
(Australia
model)
*1 Set the appropriate remote control code for TV in advance (see
page 124).
*2 This unit plays the last received station or selected contents before the
unit was set in the standby mode.
First Second
STANDBY
—
(*1)
POWER
TV
MULTI
V-AUX
PHONO
MD
TAPE
BD
HD DVD
DVD
CD
CD-R
CBL
SAT
POWER
DTV
DVR
VCR
TUNER
DOCK
(*2)
NET
USB
(*2)
XM

■ Programming macro operations (MACRO)

You can program your own macro and use the macro programming
feature to transmit several remote control commands in sequence at
the press of a button. Be sure to set up remote control codes or
perform learning operations before programming the macro.
Notes
• The default macro is not cleared when a new macro is programmed for a
button. The default macro can be used again when the programmed macro
is cleared.
• It is not possible to add a new signal (macro step) to the default macro.
Programming a macro changes all macro contents.
• We do not recommend that you program continuous operations (for
example, volume control) in a macro.
1
Press GSETUP on the remote control using a
ballpoint pen or similar object.
"SETUP" appears in the display window (4).
SETUP
2
Press 9k / n repeatedly to select "MACRO" and then
press 9ENTER.
The remote control enters the macro-programming mode.
"MACRO" and "M:the three-letter name of the selected control
area" (for example, "M:DVD") appears in the display window
(4) alternately.
MACRO
3
Press the desired macro button you want to assign
the macro program to and then press 9ENTER.
"M:the three-letter name of the selected macro button" (for
example, "M:DVD") and the name of the currently selected
control area appears in the display window (4) alternately.
When you press DSTANDBY or EPOWER, "M:STB" or
"M:PWR" and the name of the currently selected control area
appears in the display window (4) alternately.
4
Press the buttons for the functions you want to
include in the macro operation in sequence.
Remote control features
M:DVD
129
En