Saving And Recalling The System Settings (System Memory); Saving The System Settings - Yamaha SR-PGB54P Owner's Manual

Saving and recalling the system settings (SYSTEM MEMORY)

Use this feature to save up to six of your favorite settings
that can be easily recalled when needed. You can save the
following system setting parameters:
Saved parameters
"SPEAKER MENU" parameters
(except "TEST TONE")
"VOLUME MENU" parameters
(except "INIT. VOL.")
"SOUND MENU" parameters*
"VIDEO MENU" parameters
"DISPLAY SET" parameters
(except "SHORT MESSAGE")
Sound field program (or "Pure Direct")
currently selected
Sound field parameter settings
Tonal quality control settings*
* The settings of "DYNAMIC RANGE", "LFE LEVEL", and
the tonal quality control for headphones are not saved.

Saving the system settings

■ Saving by the 6 SYSTEM MEMORY
buttons
You can save the system settings stored in "MEMORY1"
to "MEMORY4" by pressing the corresponding
6 SYSTEM MEMORY buttons.
Press and hold one of the 6SYSTEM MEMORY
buttons on the remote control for 4 seconds.
"MEMORY 1 SAVE Done" (example) appears in the front
panel display, and then this unit saves the current system
setting to the corresponding memory number.
SYSTEM MEMORY
1 2
y
If system settings are already stored in the selected memory
number, this unit overwrites the old settings.
78
En
Page
67
69
70
72
75
38
59
45
3 4
■ Saving by the SET MENU operation
You can save the system settings stored in "MEMORY1"
to "MEMORY6" by using the "SYSTEM MEMORY"
menu in "SET MENU".
1
Set the operation mode selector on the
remote control to E AMP and then press
H MENU.
The top "SET MENU" screen appears in the OSD.
2
Press 8n to select "SYSTEM MEMORY" and
then press 8 ENTER.
The "SYSTEM MEMORY" menu appears.
3
Press 8n to select "SAVE" and then press
8 ENTER.
The current system settings are displayed.
SYSTEM MEMORY
.
SAVE;;;;;;;CURRENT
Church in Freiburg
ADAPTIVE DRC;;AUTO
EQUALIZER;;;;;;PEQ
PEQ TYPE;;;NATURAL
[p]/[[]:
[ENTER]:
Current system settings
4
Press 8 l / h repeatedly to select the
desired memory number ("MEMORY1" to
"MEMORY6").
The system settings currently stored in the selected
memory number are displayed. If the memory
number is not in use, "EMPTY" appears.
SYSTEM MEMORY
. SAVE;;;;;;;MEMORY1
ADAPTIVE DRC;;AUTO
EQUALIZER;;;;;;GEQ
PEQ TYPE;;;;;;NONE
[p]/[[]:
[ENTER]:
System settings stored in the
selected memory number
y
• If system settings are already stored in the selected
memory number, this unit overwrites the old settings.
• To load the system settings with the 6SYSTEM
MEMORY button operation, use one of "MEMORY1" to
"MEMORY4".
Select
Return
Drama
Select
Save