Saving And Recalling The System Settings (System Memory); Saving The Current System Settings - Yamaha RX-V3800 Owner's Manual

SAVING AND RECALLING THE SYSTEM SETTINGS (SYSTEM MEMORY)

Saving and recalling the system settings (System Memory)
Use this feature to save up to six of your favorite settings
that can be easily recalled when needed. You can save the
following system setting parameters:
Saved parameters
"Stereo/Surround" parameters
"Volume" parameters
(except "Initial Volume")
"Sound" parameters* (except "EXTD
Surround" and "Channel Mute")
"Video" parameters (except "Short Message")
"Basic" parameters
"Front Panel Disp." parameters
"Support Audio"
Currently selected sound field program (or the
Pure Direct mode)
Tonal quality control settings*
* The settings of "Dynamic Range", "LFE Level", "Tone
Control", and the tonal quality control for headphones are not
saved.

Saving the current system settings

Before performing the following operations, set the operation
mode selector on the remote control to D AMP.
Saving by the N SYSTEM MEMORY
buttons
You can save the system settings stored in "Memory1" to
"Memory4" by pressing the corresponding N SYSTEM
MEMORY buttons.
Press and hold one of the N SYSTEM MEMORY
buttons on the remote control for 4 seconds.
"MEMORY 1 SAVE Done" (example) appears in the front
panel display, and then this unit saves the current system
setting to the corresponding memory number.
SYSTEM MEMORY
1 2
Note
If system settings are already saved in the selected memory
number, this unit overwrites the old system settings.
100
En
Page
74
84
85
89
91
96
98
45, 51
51
3 4
Saving by the SET MENU operation
You can save the system settings stored in "Memory1" to
Memory6" by using the "System Memory" menu in "SET
MENU".
Press G SET MENU on the remote control.
1
The top menu appears in the GUI.
Stereo/Surround
Input Select
Manual Setup
Auto Setup
System Memory
2
Press 4k / n repeatedly to select "System
Memory" and then press 4h.
The "System Memory" menu appears in the GUI.
Load
Save
3
Press 4k / n to select "Save" and then press
4h.
The following menu appears in the GUI.
Current
Memory1
Memory2
Sound
Video
Basic
NET/USB
Option
Current
Memory1
Memory2
Memory3
Memory4
Sci-Fi
SpeakerCH 4/3/0.1
LFE Level 0dB
D-Range MAX
PEQ YPAO Natural
Current system parameters