Table of Contents
Advertisement
2.3. Mounting the Steering Controller
The Steering Controller (STU - Disc steering) can
be mounted to the manifold using an STU
bracket or directly on the frame of the
implement (Figure 7). Be sure to mount the STU
close enough to the manifold, keeping the
length of the STU harness in mind.
It is recommended to mount the STU flat or
with the connectors pointed downwards to
prevent water collecting in the connectors.
2.4. Mounting the DynamIQ ISO/SGC
Mount the DynamIQ terrain compensation on a
flat surface free from vibrations and preferably
with the connectors pointing to the rear (default
configuration). A good place would be on the
main frame of the implement (Figure 7).
Page 18/50 I SBG-Disc CAN-EN-Rev. A
SBGuidance Disc I Rev. A I CAN
Figure 7 Steering Controller and DynamIQ
Advertisement
Table of Contents
