16.4 Change the belt
Loosen screws (1)
Remove belt cover (2)
Loosen safety screw (3)
Loosen the belt tension by turning the screws (4)
counterclockwise!
Change belts.
Retighten the screws (4). Do not overtighten!
Replace the belt cover and tighten all bolts
16.5 Cleaning
After each workshift the machine has to be cleaned. Remove chips etc. with a suitable tool. Do
not remove them by hand (cutting injury!). Remove dust as well.
The usage of certain solutions containing ingredients damaging metal
surfaces as well as the use of scrubbing agents will damage the machine
surface!
Clean the machine surface with a wet cloth soaked in a mild detergent
Put on all coatless flats a thin coat of oil.
16.6 Disposal
Do not dispose the machine in residual waste. Contact your local authorities for
information regarding the available disposal options. When you buy at your local
dealer for a replacement unit, the latter is obliged to exchange your old..
HOLZMANN MASCHINEN GmbH
www.holzmann-maschinen.at
N O T I C E
MAINTENANCE
35
KG 305JL