Assembly - Holzmann KG 305JL User Manual

ASSEMBLY

Please check the product contents immediately after receipt for any eventual transport damage or
missing parts. Claims from transport damage or missing parts must be placed immediately after
initial machine receipt and unpacking before putting the machine into operation. Please
understand that later claims cannot be accepted anymore.
14.1 Assembly
Miter lock (1):
Thread the miter lock (1) into the hole.
Cutting head:
Raising:
Push down slightly on the Handle (1)
and pull out the stop latch knob (2).
Allow the cutting head to rise to the up
position.
Locking:
Push the cutting head down to its
lowest position.
Push the stop latch knob into the
locking hole.
Dust bag (2):
Squeeze the metal collar wings (1) of
the dust bag and pull the dust bag over
the dust collector plug (3).
Release the metal collar wings
Extension bracket (3):
Insert the extension bracket bars (1)
into the holes (2).
Thread one secure screw (4) into the
end of an extension bracket bar.
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
ASSEMBLY
28
KG 305JL