Transport; Workplace Requirements - Holzmann KG 305JL User Manual

Work piece downholder (1):
Place it in one of the mounting
holes (2).

14.2 Transport

When bringing the machine to the workplace you have to prepare it for transport.
These instructions have to be followed prior to every transport of the sliding compound saw
 Disconnect the machine from the power supply.
 Swing the saw arm into the lowest position and lock it in that position with the interlock knob.
 Lift the machine only at the transport handle.

14.3 Workplace requirements

The machine has to be attached to the underground. For this purpose there are 4 borings at the
ground plate, two at the front side and two at the back side.
Furthermore you can attach the machine to miter saw stands.
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
ASSEMBLY
29
KG 305JL