OPERATION
15.3 Operation
15.3.1 Switch on
Connect the machine to the power supply
Read, understand and apply the security instructions.
Push safety switch (3) and ON-OFF-switch (1).
Wait until the saw blade has reached its full speed.
With the forefinger you now push the safety lock lever blade
guard (2) to the left to unlock the lower blade guard
15.3.2 Switch off
As soon as you release the ON-OFF-switch, the motor and the
saw blade stops.
15.3.3 Fence
Extend the fence (2) by sliding it out to match the degree of the
bevel cut.
Unlock the fence cam locking knob (1) and position the fence.
Lock the fence cam locking knob.
15.3.4 Miter cut
Loosen the miter lock (2), push quick cam table lock (1) and
positive stop locking lever (3). Set the desired angle (4).
Tighten the miter lock.
15.3.5 Bevel cut
Loosen the fixing knob tilt (1). Set the desired angle.
Tighten the fixing knob tilt.
HOLZMANN MASCHINEN GmbH
www.holzmann-maschinen.at
32
KG 305JL