Table of Contents
Advertisement
®
OBID i-scan
UHF
4.1.3. Charging the batteries
Figure 4 + Figure 5: ID ISC.PRHD102-B: Reset button and DC/
The rechargeable batteries may remain in the Reader for charging. You will need an external
charger connected to the DC/
Table 5: Charger connection
NOTE:
Reversing the polarity of the charger can destroy the batteries.
The Reader is not functional while the batteries are charging.
Charger :
Use a charger suitable for the battery type specified (4-cell pack).
Table 6:Recommended charger
The recommended charger is designed for nickel/cadmium (NiCd) type rechargeable batteries and
nickel/metal hydride (NiMH) with a capacity range of 800mAh to 7200 mAh.
Alternately the batteries can be removed from the Reader and charged in a separate battery
charger.
FEIG ELECTRONIC GmbH
Reset -
button
jack.
DC jack
Abbreviation
Inside
+
Outside
-
Feig Article No.
2650.000.00
Installation
DC-Plug
Description
Plus – charge voltage
Minus – charge voltage
Name
ID CHA.NiMH-A
Page 13 of 23
ID ISC.PRHD102
Plus (inside)
Minus (outside)
plug 2.1mm*5.5mm
M80601-4e-ID-B.docx
Hide quick links:
Advertisement
Table of Contents
