Supply Voltage - Feig Electronic OBID i-scan ISC.PRHD102 Installation Manual

®
OBID i-scan UHF Installation ID ISC.PRHD102

4.1.2. Supply voltage

The Reader is powered by rechargeable batteries. Four AA type rechargeable batteries are used.
These are inserted into the handle of the Reader. To change the batteries, remove the battery
cover. After unlatching the springs the cover can be removed. The rechargeable batteries are
placed in the compartment according to the + and – symbols indicated (note polarity). Then
replace the cover and listen for the spring to audibly latch.
Table 4: Designations for rechargeable Mignon-type batteries
General type Europe USA Size (D*l)
Mignon R6 / UM-3 AA 15mm * 51mm
NOTE:
Use only Nickel/Cadmium (NiCd) or Nickel/Metal Hydride (NiMH) batteries.
Do not use single-use batteries (e.g. zinc-carbon / alkaline) batteries.
Reversed polarity may destroy the device.
Rechargeable batteries should never be discarded with normal trash; please return them to
a proper collection location !
Figure 3: Inserting the rechargeable batteries
FEIG ELECTRONIC GmbH Page 12 of 23 M80601-4e-ID-B.docx