Label Information; Installation With Fcc / Ic Approval; Usa (Fcc) And Canada (Ic) Approved Antennas - Feig Electronic OBID i-scan ISC.PRHD102 Installation Manual

®
OBID i-scan UHF Installation ID ISC.PRHD102

6.3.2. Label Information

The following information must be placed at the outer side of the housing in which the reader is
mounted.
Contains FCC ID PJMPRHD102
Contains IC: 6633A-PRHD102

6.3.3. Installation with FCC / IC Approval

FCC-/IC-NOTICE: To comply with FCC Part 15 Rules in the United States / with IC Radio Stan-
dards in Canada, the system must be professionally installed to ensure compliance with the Part
15 certification / IC certification. It is the responsibility of the operator and professional installer to
ensure that only certified systems are deployed in the United States / Canada.

6.3.4. USA (FCC) and Canada (IC) approved antennas

This radio transmitter (identify the device by certification number, or model number if Category II)
has been approved by Industry Canada to operate with the antenna types listed below with maxi-
mum permission gain and required antenna impedance for each antenna type indicated. Antenna
types, not included in this list, having a gain greater than the maximum gain indicated for that type,
are strictly prohibited for use with this device
Le présent émetteur radio (identifier le dispositif par son numéro de certification ou son numéro de
modèle s'il fait partie du matériel de catégorie I) a été approuvé par Industrie Canada pour fonc-
tionner avec les types d'antenne 'énoncé ci-dessus et ayant un gain admissible maximal et
l'impédance requise pour chaque type d'antenne. Les types d'antenne non inclus dans cette liste,
ou dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation
de l'émetteur
Following antennas are approved by FCC according FCC Part 15 and IC Canada according
RS210
•
Internal antennas
FEIG ELECTRONIC GmbH Page 22 of 23 M80601-4e-ID-B.docx