Assembly And Wiring; Reader With Bluetooth™ Interface Id Isc.prhd102-B; Bluetooth™(Bt) Interface - Feig Electronic OBID i-scan ISC.PRHD102 Installation Manual

Hf/uhf combined handheld reader
Table of Contents

Advertisement

®
OBID i-scan
UHF
Installation
ID ISC.PRHD102

4. Assembly and Wiring

4.1. Reader with Bluetooth™ interface ID ISC.PRHD102-B
The Reader has a Bluetooth port. The supply voltage is provided only by rechargeable batteries.
The Reader is activated using the Scan button. This opens a Bluetooth connection automatically
within approx. 3 seconds. The Reader is now ready to use. After releasing the button, the Reader
remains active for several minutes. During this time the Bluetooth connection remains open.
Pressing the button again immediately starts a Scan.
4.1.1. Bluetooth™(BT) interface
Communication to the Reader is through a Bluetooth connection. Bluetooth is a short-distance
wireless RF connection which enables permanent wireless communications connections between
portable and desktop or peripheral devices. Each Bluetooth device has a unique address and can
be optionally identified with a self-explanatory name. Password protection is used for security of a
Bluetooth connection, with the Bluetooth partner being added to a confidential list. SPP (Serial Port
Profile) is used.
Initial setup of a "paired connection" to the Reader is done by the host. After initial setup the
establishment of the bluetooth connection happens automatically by pressing the Scan button. To
establish a connection to another Bluetooth-Dongle you must first clear the existing "paired
connection" entry in the bluetooth interface of the reader (see
4.1.4. Reset - button (ID
ISC.PRHD102-B
only)).
All Readers have a factory set name and a preset password. The name "OBID_PRHD102B"
consists of a fixed (OBID_PRHD) and a user modifiable (102B) part.
Table 3: configuration of the Bluetooth Interface
Description
Default setting
Name variable
102B
Password
1234
NOTE:
Until FECOM.DLL version 2.8.8 the COM-Port setting "Char Timeout Multiplier" from PC or
Notebook should be increased to 9-10 if a Bluetooth reader is used.
FEIG ELECTRONIC GmbH
Page 11 of 23
M80601-4e-ID-B.docx

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents