®
OBID i-scan
UHF
General information's regarding this document
•
The sign "" indicates extensions or changes of this manual compared with the former issue.
•
If bits within one byte are filled with "-", these bit spaces are reserved for future extensions or
for internal testing- and manufacturing-functions. These bit spaces must not be changed, as this
may cause faulty operation of the reader.
•
The following figure formats are used:
0...9:
0x00...0xFF:
b0...1
•
The hexadecimal value in brackets "[ ]" marks a control byte (command).
FEIG ELECTRONIC GmbH
for decimal figures
for hexadecimal figures,
for binary figures.
Installation
Page 3 of 23
ID ISC.PRHD102
M80601-4e-ID-B.docx