Fixture Information; Presents; Auto; Pattern - ProLights SMARTOWER User Manual

SMARTOWER - SMARTOWERPACK

3.10 FIXTURE INFORMATION

To view all the information on the device, proceed as follows:
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the icon Information, then press the ENTER button
to enter the next menu.
• Press the UP/DOWN button to scroll through the menu, then select Software Version to display the cur-
rently installed software version and press the ENTER button to display it.
• Press the ESC button to go back or to meet the waiting time to exit the setup menu..
3.11 PRESETS
The unit has preset pre-programmed colors that can be set through the following procedure:
• Press the UP/DOWN button to scroll the menu, select Static, then press the ENTER button to enter the
next menù.
• Select Presets throught the UP/DOWN button, then press the ENTER button to confirm.
• Set the color (Red, Deep Orange, Light Orange, Yellow, Green, Sea Green, Aquamarine, Cyan, Blue, Violet, Purple,
Magenta, White) throught the UP/DOWN button, then press the ENTER button to confirm.
• Press the ESC button to go back or to meet the waiting time to exit the setup menu.

3.12 AUTO

The unit has automatic pre-programmed show that can be set through the following procedure:
• Press the UP/DOWN button to scroll the menu, select Static, then press the ENTER button to enter the
next menù.
• Select Auto throught the UP/DOWN button, then press the ENTER button to confirm.
• Set the value (1~25) throught the UP/DOWN button, then press the ENTER button to confirm.
• Press the ESC button to go back or to meet the waiting time to exit the setup menu.

3.13 PATTERN

The unit has automatic pattern that can be set through the following procedure:
• Press the UP/DOWN button to scroll the menu, select Static, then press the ENTER button to enter the
next menù.
• Select Pattern throught the UP/DOWN button, then press the ENTER button to confirm.
• Set the value (1~25) throught the UP/DOWN button, then press the ENTER button to confirm.
• Press the ESC button to go back or to meet the waiting time to exit the setup menu.
3.14 MANUAL
This function allows you to create your own customized stand alone, using the following parameters:
Shutter, Dimmer, Dimmer Fade, Color Function, Virtual Color1, Virtual Color2, Red all, Green all, Blue all, Pattern, Pattern
speed, Pattern Dimmer Transition, Foreground, Foreground dimmer, Foreground shutter, Background, Background dimmer,
Background Shutter.
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the Static icon, then press the ENTER button to
enter the next menu.
• Press the UP/DOWN button to scroll through the menu, select Manual and press the ENTER button to
enter the next menu.
• Press the UP/DOWN button to select one of the parameters and press ENTER to edit the value (000-255)
through the UP/DOWN button. Press the ENTER button to confirm your choice and then press the ESC
button repeatedly to exit the menu and save changes.
13