Controller Ir - ProLights SMARTOWER User Manual

SMARTOWER - SMARTOWERPACK
12

3.9 CONTROLLER IR

Make sure to point the controller directly at the IR receiver near the switch to turn on/off the SMARTOWER.
Use the keys as below to access the functions.
FUNCTION
(POWER ON/OFF)
(STROBE ON/OFF)
(SPEED ADJUST)
(COLOR ADJUST
DEEP ORANGE
LIGHT ORANGE
COLD WHITE
POWER Press this button for one time, the fixture will be power on and all
LED will be red.The fixture will be power off if you press it twice.
STROBE
After pressing button "STROBE",you can chose the strobe mode by
using button "UP" or "DOWN".
1.At STROBE mode, you can adjust the strobe speed by using button
"UP" or "DOWN".
SPEED
2.At AUTO mode, you can adjust the auto speed by using button
"UP" or "DOWN".
DIMMER Can adjust the brightness by using button "UP" or "DOWN".
MANUAL
Can choose RGB by pressing button "MANUAL",and then using "UP"
or "DOWN" to adjust the color.
MANUAL)
RED
Can adjust the color by using "UP" or "Down",while it cann't adjust
GREEN
the color in STATIC mode.
BLUE
STATIC Can choose the color by pressing the button "STATIC".
...
Press button "AUTO" for one time, can choose the effect by "UP" or
AUTO "DOWN". The effect can be moving reversely by pressing button
"AUTO" twice.
Press this button,fade is working and can adjust the fade effect by
FADE
using button "UP" or "DOWN".
ISTRUCTIONS
POWER
MANUAL DIMMER SPEED STROBE
AMBER
AUTO FADE
MACRO
UV
SENSIT. SOUND
DEEP LIGHT
RED YELLOW
ORANGE ORANGE
SEA AQUA
GREEN
CYAN
GREEN MARINE
BLUE VIOLET PURPLE MAGENTA
WARM COLD
STATIC
WHITE
WHITE WHITE
Fig.8