SMARTOWER - SMARTOWERPACK
3.7 DISPLAY SETTINGS
You can change the following parameters related to the display, following the same procedure:
• Press the ENTER button to access the main menu.
• Press the UP / DOWN keys to scroll the menu, select the Set icon, then press the ENTER button to enter
the next menu.
• Press UP / DOWN to scroll through the menu, then select Screen, and press the ENTER button to enter
the next menu.
• Press UP / DOWN to scroll through the menu, and then select one of the following settings for the dis-
play and press the ENTER key to display it.
- Back Light - Backlight display Auto Off. This feature allows you to automatically turn off the backlight
after a specified time that you can set using the arrow buttons. To have the display always on select
Always On or set a value of 01-99 min to turn off the display after the amount of time you choose.
- Flip Display - Orientation of the display. This function allows you to rotate the display 180° to get a
better view of the display when the unit is hanging upside down. Select ON to activate or OFF to
disable this function.
• Press the ENTER button to confirm your choice.
• Press the ESC button to go back or to meet the waiting time to exit the setup menu.
3.8 WIFI FUNCTION
To enable wireless control mode, proceed as follows:
• Press the UP/DOWN button to scroll the menu, select Control, then press the ENTER button to enter the
next menù.
• Press theUP/DOWN button to select Wireless then press the ENTER button to store.
• Select Reset Connect to reset the unit and press the ENTER button to store.
• Press the ESC button to go back or to meet the waiting time to exit the setup menu.
DMX512 Controller
wireless
solution
11
Fig.7