Song Mixing And Storing The Settings As A Template - Yamaha MOTIF6 Owner's Manual

11. Song Mixing and storing the settings as a template

In this final step (other than saving your precious work, which we'll cover next), you can mix down your tracks with
the Song Mixing function — adjusting the volume balance and pan setting of all the parts and tweaking the effect
levels. Moreover, you can save your mixing settings as a template (up to sixteen templates can be saved), then call up
the appropriate template when mixing down a song that has a similar track structure.
1
Enter the Song Mixing
mode.
SEQUENCER
SONG PATTERN FILE
INTEGRATED
SAMPLING MIXING UTILITY
2
Call up the desired display.
SF 1 SF 2 SF 3 SF 4
F1 F2 F3 F4
6
Call up the TEMPLATE display.
SF 1 SF 2 SF 3
F1 F2 F3
9
Execute the Store operation.
SF 1 SF 2 SF 3
F1 F2 F3
n The template stored above can be recalled by pressing
the [SF4] (GET) button from this display.
3 Select a part.
DEC/NO INC/YES
ENTER
EXIT
EXECUTE
n When a Multi part Plug-in board (PLG-100XG) has been installed to slot 3, the
display for Parts 17 - 32 can be called up. When a Single part Plug-in board has
been installed to any of the three slots, the PLG 1~3 part display can be called up.
KNOB
CONTROL
FUNCTION
MASTER
VOLUME
OCTAVE
DOWN UP
INFORMATION
SF 5
F5 F6
7
INFORMATION
SF 4 SF 5
F4 F5 F6
8
INFORMATION
SF 4 SF 5
F4 F5 F6
Sampling with Song Playback (Integrated Sampling Sequencer)
1 2 3 4 5
ELEMENT/ PERF.PART / ZONE
or
9 10 11 12 13
PAN REVERB CHORUS TEMPO
CUTOFF RESONANCE ATTACK RELEASE
ASSIGN A ASSIGN B ASSIGN 1 ASSIGN 2 REMOTE
CONTROL
ON/OFF
MODE
KN 1 KN 2 KN 3 KN 4
VOICE PERFORM MASTER
MEQ LOW MEQLOWMID MEQ HI MID MEQ HIGH EFFECT BYPASS ARPEGGIO
INSERTION SYSTEM ON/OFF
VOLUME 1 VOLUME 2 VOLUME 3 VOLUME 4 SEQUENCER
SONG PATTERN FILE
SEQ TRANSPORT
INTEGRATED
SAMPLING MIXING UTILITY
SONG SCENE
SF 1 SF 2 SF 3 SF 4 SF 5 INFORMATION
LOCATE 1 2
REC
EDIT JOB STORE F1 F2 F3 F4 F5 F6
COMPARE SCENE STORE
SET LOCATE
CS 1 CS 2 CS 3 CS 4
ZONE 1 ZONE 2 ZONE 3 ZONE 4
Select the destination template number.
Move the cursor to the template number and select the number to
which the settings are to be stored.
DEC/NO INC/YES
EXIT ENTER
Template number
EXECUTE
Name the template.
DEC/NO INC/YES
EXIT ENTER
n For details about naming, see page 75.
EXECUTE
Reference (page 205)
4 Select the
TRACK
6 7 8
SELECT
desired
parameter
14 15 16 MUTE
and adjust it.
SOLO
DEC/NO
EXIT
MUSIC PRODUCTION SYNTHESIZER
Integrated Sampling Sequencer
Real-time External Control Surface
Modular Synthesis Plug-in System
SLOT 1 SLOT 2 SLOT 3
CATEGORY
DRUM KITS PRE 2 SEARCH
PRE 1 PRE 3 GM USER PLG 1 PLG 2 PLG 3 BANK
FAVORITES A. PIANO KEYBOARD ORGAN GUITAR / BASS STRINGS BRASS REED/PIPE
COMMON PLUCKED
A B C D E F G H SECTION GROUP
DEC/NO INC/YES
SYN LEAD SYN PAD/ SYN COMP CHROMATIC DRUM / SE MUSICAL FX COMBI
CHOIR PERCUSSION PERCUSSION
TRACK
1 2 3 4 5 6 7 8
SELECT
ELEMENT/ PERF.PART / ZONE
NUMBER
EXIT ENTER 9 10 11 12 13 14 15 16 MUTE
EXECUTE SOLO
5 Set the desired parameters
for the other parts, repeating
steps #2 - 4 above.
n A wider variety of detailed editing
controls is also available in the
Song Mixing Edit mode.
Template name
MOTIF Quick Start Guide
INC/YES
ENTER
EXECUTE
117