Yamaha MOTIF6 Owner's Manual page 143

• EG Time, Segment
Determines the velocity sensitivity of the FEG's Time
parameters. Select the Segment, then set its Time
parameter.
Positive Time settings will play back the specified Segment
faster and negative values will play it back slower.
❏ Settings
Time -64 ~ 0 ~ +63
Segment ATK, ATK+DCY, DCY,
ATK+RLS, all
ATK
Affects the Attack Time.
ATK+ DCY
Affects the Attack Time and Decay1 Time.
DCY
Affects the Decay Time.
ATK+ RLS
Affects the Attack Time and Release Time.
all
Affects all FEG Time parameters.
• EG Level, Curve
Determines the velocity sensitivity of the Filter EG Level.
Positive settings cause greater Filter changes the harder
you play the keyboard. Negative settings do the opposite;
the softer you play, the more the sound changes. The
Curve parameter lets you select from five different preset
velocity curves (graphically indicated in the display), that
determine how velocity affects the Filter EG.
❏ Settings
EG Level -64 ~ 0 ~ +63
Curve 0 ~ 4
• Cutoff
Determines the degree to which velocity affects the Cutoff
frequency of the Filter EG. Extreme values produce greater
variation in the Cutoff frequency. For positive values, the
harder you play the keys, the greater the change in the
Cutoff frequency. Negative values do the opposite; the
frequency changes more the softer you play.
❏ Settings
-64 ~ 0 ~ +63
• Resonance
Determines the degree to which velocity affects the
Resonance of the Filter EG. Extreme values produce
greater variation in the Resonance. For positive values, the
harder you play the keys, the greater the Resonance
change. Negative values do the opposite; the Resonance
changes more the softer you play.
❏ Settings
-64 ~ 0 ~ +63
● [F3]-[SF3] Normal Element Filter
FEG (Filter Envelope Generator)
From this display you can make all the time and
level setting for the Filter EG, which determine how
the tonal quality of the sound changes over time.
The full names of the available parameters are
shown in the chart below, as they appear in the
display.
HOLD ATK
TIME Hold time Attack time
LEVEL Hold level Attack level
Attack Decay1
Pitch
Level Level
Hold level
0
Hold Attack Decay1
Time Time Time
• TIME
❏ Settings
0 ~ 127
• LEVEL
❏ Settings
-128 ~ 0 ~ +127 (-9600cent ~ 0 ~
+9600cent)
• DEPTH*
❏ Settings
-64~ 0 ~ 63
● [F3]-[SF4] Normal Element Filter
Key Follow
From this display you can set the Key Follow effect
for the Filter — in other words, how the tonal
qualities of the element and its Filter EG respond to
the particular notes (or octave range) you play.
n The availability of the Filter Key Follow parameter
depends on the Break Point and Offset settings
described on page 144.
Voice Edit mode
Basic Structure (page 47)
DCY1 DCY2 REL DEPTH*
Decay 1 Decay 2 Release
time time time
Decay 1 Decay 2 Release
Depth
level level level
Decay2 Release
Key off
Level Level
Time
Release
Decay2
Time
Time
143
MOTIF Reference