Yamaha MOTIF6 Owner's Manual page 256

Utility mode
● [F4]-[SF2] Controller Assign
Knob ASSIGN A, B
From this display you can assign specific functions
to the ASSIGN A and B knobs.
• ASA, ASB (Assignable A, B)
Determines the Control Change number to be controlled
by the ASSIGN knobs A and B.
❏ Settings
000~095 (Refer to the separate Data List
booklet. )
• Dest (Control Destination)
Determines the function to be controlled by the Control
Change number set above.
❏ Settings
Refer to the separate Data List booklet.
● [F4]-[SF3] Controller Assign Footswitch
From this display you can assign a specific function
to the Footswitch.
❏ Settings
000~100 (000, 032 : off, 096 : Arpeggio
Switch, 097 : Arpeggio Hold, 098 : Song/
Pattern playback start/stop, 099/100 :
Program Change INC/DEC 101 : Octave
Rest)
● [F4]-[SF4] Controller Assign Remote
The MOTIF gives you convenient remote control
over major functions in several popular sequencer
programs. This lets you automatically configure the
MOTIF for use with your particular sequencer
program, by specifying the template to be used.
❏ Settings
Cubase, Logic, Cakewalk, ProTools
256
MOTIF Reference
[Press the [ENTER] button to call up the
template provided for the selected software.
◆ Remote Control of Computer Sequence
Software
Using the Remote Control function lets you control
computer sequence software by using the buttons or
controllers on the MOTIF. Turn the Remote Control
function on by pressing the [REMOTE CONTROL
ON/OFF] button so that its lamp flashes.
REMOTE
CONTROL
ON/OFF
EFFECT BYPASS
SYSTEM
INSERTION
• Setup
Before you can use the Remote Control function,
you'll need to follow the setup instructions below.
1
Connect the MOTIF to your computer via a USB
cable. For details, see page 25.
2
Install the USB MIDI driver and the setup file
for the sequence software (contained in the
included CD-ROM) to your computer. For details
on how to install, see the Installation Guide
manual.
3
Select the template for your particular sequence
software in the Utility mode on the MOTIF
(above).
4
Set the MIDI IN/OUT setting to "USB" in the
Utility mode on the MOTIF (page 259).
• Compatible Software
The following computer sequence software
programs can be controlled via the MOTIF's
Remote Control function.
Windows
Cubase VST/32
Logic Audio Plutinum Ver4.6
Cakewalk ProAudio Ver9.0
Pro Tools V5.0
Macintosh
Cubase VST 5.0
Logic Audio Plutinum Ver4.6
Pro Tools V5.0
ARPEGGIO
ON/OFF